30L Power Sprayer for Weed or Pest Control Spray with Tank Trolley Hose Reel
Complete Spray Kit: Pump/Motor/Hose/Reel/Tank/Troley
30L Tank
26cc 2 Stroke Engine
7.7L/min Suction Rate Diaphragm Pump
10m Hose Reel with Turbo Spray Gun
Perfect for Weed Sprayer or Pest Control
If you're looking for a practical, convenient and fast way to apply pesticides or weed spray over large-areas, then this A30ER will prove the perfect work-partner.
Features:
- Compelete sprayer kit with Pump, Motor, Hose Reel, Tank and Trolley
- Alumium trolley and mouting bracket for corrosion free
- UV stabilised, high strength polyethylene tank
- Eash to setup and detach
- 10 meter chemical grade sprayer hose reel with turbo spray gun
- 15cm Large Filling openning with Strainer
- Suction hose with strainer and overflow hose included
- Powerful 2 stroke petrol powered engee
- High Pressure piston pump
Specifications:
- Overall size: 92(H) x 65(W) x (H)cm/li>
- Empty Weight: 21kg
- Tank Capacity: 30L
- Fuel Tank Capacity: 0.6L
- Hose Reel Length: 10 meter
- Diameter of filling openning: 15cm
- Pump Type: High Pressure Piston Pump
- Pumpe Operate Pressure: 1-4Mpa
- Suction Capacity: 7.1 L/min
- Rotational Frequency: 1800/min
- Engine Model: TU26
- Engine Type: Forced air cool, 2 Cycle
- Engine Displacement: 26cc
- Max output: 0.9Hp/6000 rpm
- Fuel: Mixed gasline 25:1
- Igition Sytem: Electronics Ignition
- Carburetor: Diaphragm type
- Starting system: Recoil Starter
Application:
Widely used in farmland , orchards , gardens , vegetable base rule controlling pests , water pumping , spray irrigation , etc. , can also be used in public places , such as cleaning and garbage site disinfection spray medicine .
1 Please check carefully before starting each of the fasteners are tightened to ensure that sprayer and motor are mounted on a tripod ;
2 Adjust the drive belt and two pulleys to a parallel state , elastic medium ;
3 Each locking tube connector to prevent leakage ;
4 Turn off the water before starting the motor switch , loosen the screw regulator , the regulator handle is pulled to the top ;
5 The starter motor drive unit to maintain an appropriate rotational speed , the pressure in the end and handle end of the regulator to adjust the pressure regulator to keep the wheel in between 1.0-3.0MPa , the switch opens the water spray began to work properly ;
6 Using the method according to the different needs and sprinklers , ibid method of adjusting to normal operating pressure.
If you have any doubts, feel free to contact us.
You can also put your enquiry in below dialog and send it to me!